Speaker enclosures……A rabbit hole…

Blimey, who’d have thought……

Back in the old days, it was as simple as ‘buy a speaker’ , shove it in a box and voila…….

 

Nowadays though…………

http://audiojudgement.com/types-of-enclosures-which-is-the-best/

There’s quite a few, including the following types…………

  • Sealed enclosure
  • Infinite baffle
  • Open Baffle
  • Free-air
  • Bass reflex
  • Ported
  • Vented
  • Bandpass
  • Transmission Line
  • Folded Horn
  • Isobaric

Each has different properties, suited for different things……some are as easy as ‘shove it in a box’, others need complex enclosure geometry and some math………

Now, considering I have 5 speaker drivers waiting to be hooked up, own two 3D printers (and a CNC), Know a bit about Fusion360 and have a penchant for overthinking and overcomplicating stuff (hey, where’s the fun when it’s simple!?)…..I figured, lets learn a little bit about speaker enclosure design……

Turns out, there’s quite a few youtube videos……….

One in particular from a channel that I’d already subscribed to a few months ago…….HexiBase – Can a 3D printed enclosure Get low

Look at the size of that box!……..It uses a Folded Waveguide type resonance chamber for the enclosure…..which appears very similar in design to a ‘Transmission line’ style of speaker.

….Challenge accepted….I’m going to build a small Transmission line speaker!

3D Printed Speaker enclosures – another rabbit hole

PS95-8After months (and months) I’ve finally been able to pull my thumb out and start a long wanted upgrade of my somewhat old Home Theater system…….With a 3D printed ‘twist’

Continue reading “3D Printed Speaker enclosures – another rabbit hole”