Super LED Blinkenator 2000 – Beta …Err, lost count!

BETA 12….ALMOST IDENTICAL TO BETA 11

Beta 11 had a minor cock-up in that i’d missed off the 3v3 line. I’ve also taken the oportunity to shift things around a bit, re-align stuff and generally do a lot of really picky small stuff that generally makes me feel a bit better. Except that upside down C22 that i’ve just spotted, D’oh!

Also, I now introduce 2 more members of the Super LED Blinkenator 2000 family

The Clampinator

This one, you’ve kind of met before. It’s a small ‘clamp’ PCB, but it now splits into two parts. One ‘spacer / shim’ sits in-between the Clampy larger bit, the other, is the clampy larger bit.

When installed, it’ll look a little something like this…..

Blue is the Next PCB. Red is the tiny thin break-off ‘spacer’. Black is the Blinkenator.

The Red ‘shim’ part stops the yellow clamping PCB from getting too close to the Blinkenator when the screws and nuts are tightened.

That combination of PCB’s, copper balls, nuts & bolts provides a robust electrical contact to J15 – Without needing to solder. Yes, it’s a little fiddly – I’ll make some instructions.

Another Member – The Programminator

Glorified serial to USB convertor

Now i’ve switched over to a SMT atmega chip, it needs programming. I’ve bought some of the important signals out to a PCI EXpress connector to make for me, at Bleugh.Biz headquarters to quickly program the on-board arduino and test some basic features.

I thinkn REV 2 of this board could be useful for general tinkering also, so i’ll probably do a limited run to sell if people really want them. I’ll send out a handful of REV1 of this board to the BETA testers, IF BETA12 works.

And, finally – a quick overview of the new layout and routing. I’m now confident enough in the design to use a copper pour for a much more professional finish!

Author: Bleugh

Early Fourties, Wife, two kids in primary school. Both of us work full time...3 years now Back in Blighty after a decade away...It's a new country for everyone! Still finding time to tinker!

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s